Skip to content Skip to footer

Solutions for a Broken Door Latch That is Not Springing Back

Perhaps the most important task of a construction door is to open and close on time, and we don’t have any trouble doing this simple task. This is the reason why building doors are usually made light so that they don’t have any problems opening and closing, but sometimes it is possible that the door latch is stuck or not latching, and you have to deal with it.

In such a situation, it is better to look for solutions to solve the problem of the door not closing. In this article, we want to discuss this problem and tell you what you should do to solve it. But before anything else, we need to talk about the door latch. Knowing the cause of a problem will make it easier to solve it. Stay with us.

Door Latch Not Springing Back

You must have seen this problem from different perspectives. The refrigerator door does not close properly, while the front door closes with pressure and effort. Even the garage door that works with an electric motor may have this problem. So, the main question here is why the door doesn’t close. What is the problem in the structure of these doors that causes them not to close?

One of the main reasons for the door not closing is a problem with the door hinge. One of the screws or hinge components of the door may be damaged and prevent it from closing correctly.

Another reason the door does not close is related to its adjustment. Unfortunately, in some cities, we are witnessing land subsidence and every year, our buildings go down a few millimeters. As a result, it seems that the door is out of its adjustment state and finally does not close properly. Therefore, if you notice that the flush door has not closed properly recently, you should think about adjusting its regulation.

Door Latch Stuck

Regardless of these two things we mentioned, the door not closing may be due to its decay. Especially if the door of the house is made of wood. After a while, it will swell and not close properly. Especially if you use wooden doors in humid environments, this problem will be quite common and natural. This is why, before considering solutions to solve the problem of the door not closing, it is better to first look for the cause of this problem. In the following, we will give solutions to the following problems:

  • door not latching
  • door latch closed

Troubleshooting Common Issues Solutions and DIY Tips

Solutions to solve the problem of the door not closing:

Spray Oil on the Door Hinge

Hinge wear is one of the main reasons why shaker doors do not close. When the hinge of the building door does not work properly, the door will not close properly and will have problems. In such a situation, one of your best solutions is to spray special oil on the door hinge. After doing this, open and close the door a little so that the oil reaches all the hinge surfaces, and thus the problem is solved.

Usually, when the door is slightly open and does not close completely, the problem is the hinges. Lubricate the door lock to fix the problem.

Wear and friction can quickly damage the fittings of building doors. Therefore, continuous oil use can greatly help the hinges’ smoothness and the door’s proper functioning. You should oil the door lock once every six months to prevent problems such as the building door not closing.

Door Latch Lock with Key

After a tiring day of work, you may encounter the problem of the key getting stuck in the lock after opening the door. You probably won’t get any results no matter how hard you try. But what is the solution? Is there a way to get the key out of the stuck lock? How can the key be removed from the lock without the help of an expert?

One simple way to save the key stuck inside the lock is to use lubricating spray or oils. In the past, the same oils were also used to reduce the unpleasant sound of old doors. It is not bad to pour some of them into a spray container and spray them on the lock.

The door latch does not open backward.

Sometimes, the door may not close due to various reasons, such as warping, swelling due to moisture, problems with the lock, handle or hinge, etc., but the reason for the door not opening may be due to some of these reasons, such as handle failure. Maybe the door lock or lock tab has a problem. In this case, be sure to get help from an expert to solve the problem.

Leave a comment